Power Sunroof Express Module Replacement

REMOVAL PROCEDURE
1. Position the sunroof in the fully closed position.
2. Remove the headliner.
3. Unsnap the express module from the sunroof module then push module towards the center of the vehicle.
4. Remove the electrical connector from the express module.
5. Remove the express module from the sunroof.

INSTALLATION PROCEDURE
1. Install the express module to the sunroof.
2. Install the electrical connector to the express module.
3. Install the express module to the sunroof module then snap into place.
4. Install the headliner.
5. Check the operation of the sunroof.