4T65-E Automatic Transaxle

REMOVAL PROCEDURE





1. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting.
2. Loosen the oil pan bolts.
3. Drain the oil.
4. Remove the oil pan attaching bolts.





5. Remove the oil pan.





6. Remove the oil pan gasket.

INSTALLATION PROCEDURE





1. Install the oil pan gasket. If the sealing ribs are damaged, use a new gasket.





2. Install the oil pan.





3. Install the oil pan attaching bolts.
^ Tighten the oil pan bolts to 14 Nm (124 inch lbs.).

NOTICE: Refer to Fastener Notice

4. Lower the vehicle.
5. Refill the transmission to the proper level with DEXRON (R) III oil.
6. Inspect the oil pan gasket for leaks.