Intake Air Duct: Service and Repair

Description:

REMOVAL PROCEDURE

1. Loosen both air duct clamps.

2. Remove duct from air cleaner and rotate duct upwards around the MAF sensor.

3. Remove the inlet snorkel by pulling upwards and inboard.

INSTALLATION PROCEDURE

1. Rotate the intake air duct down.

2. Install the intake air duct onto the air cleaner cover.

Tighten both air cleaner duct clamps to 3.5 N.m (31 lb. in) at the throttle body and 1.8 N.m (16 lb. in) at the air cleaner.