Exhaust Pipe

REMOVAL PROCEDURE
1. Remove bolt at water pump housing (3).
2. Raise and support the vehicle.
3. Remove the Crossover Exhaust Pipe.
4. Remove the nut from Crossover Exhaust Pipe (5).
5. Remove the EGR Valve Pipe (6).

INSTALLATION PROCEDURE
1. Install Crossover Exhaust Pipe.
2. Install EGR Pipe Nut to Crossover Exhaust Pipe (5).

Tighten to 60 Nm (44 lb. ft.)

3. Lower the vehicle.
4. Install bolt at waterpump housing (3).

Tighten to 24 Nm (18 lb. ft.)