Radiator Inlet Hose Replacement

REMOVAL PROCEDURE





1. Disconnect the negative battery cable.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

2. Raise the vehicle.
3. Remove the lower front air deflector.
4. Drain the coolant. Refer to Draining and Filling Cooling System in Cooling System.
5. Lower the vehicle.
6. Remove the radiator inlet hose (1) from the radiator.
7. Remove the radiator inlet hose (1) from the engine,

INSTALLATION PROCEDURE





1. Install the radiator inlet hose (1) to the engine.
2. Install the radiator inlet hose (1) to the radiator.





3. Install the lower front air deflector.
4. Lower the vehicle.
5. Refill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
6. Connect the negative battery cable.
7. Start the engine.
8. Check for leaks.