Memory Recall

When the DRIVER-1 or DRIVER-2 button is pressed, the memory seat/mirror module receives the input and a single chime is sounded. The memory seat/mirror module supplies battery positive voltage (B+) to the seat motors until all the seat position sensor feedback voltages equal the feedback voltages stored in memory for the appropriate driver.

When the DRIVER-1 and DRIVER-2 buttons are pressed simultaneously or the EXIT button is pressed, battery positive voltage (B+) is supplied simultaneously to the memory seat/mirror module memory 1 and memory 2 inputs, signaling the easy exit function. In response, the memory seat/mirror module will move the seat to the fully down and back position. The module supplies battery positive voltage (B+) to the LH front height, LH rear height, and LH forward/back motors until the seat is fully back and down. The recline motor is not moved during this operation.

Memory recall and easy exit functions may only be performed if the ignition switch is in the OFF position or if the gear selector is in the PARK position.