Disabling the SIR System

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.

IMPORTANT: With the AIR BAG Fuse removed and the ignition switch in the RUN position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.

Description:

4. Remove the AIR BAG Fuse from the IP Fuse Block (The Oldsmobile IP Fuse Block is shown. The Buick IP Fuse Block is similar and the AIR BAG Fuse is in the same location on both vehicles).

Description:

5. Remove the sound insulator-LH. Refer to Instrument Panel, Gauges, and Console.
6. Remove the Connector Position Assurance (CPA) (4) from the inflatable restraint steering wheel yellow 2-way connector (2) located at the base of the steering column.

Description:

7. Disconnect the inflatable restraint steering wheel yellow 2-way connector (2) located at the base of the steering column.

Description:

8. Remove the sound insulator-RH. Refer to Instrument Panel, Gauges and Console.
9. Locate the inflatable restraint IP module yellow 2-way connector (3).

Description:

10. Remove the Connector Position Assurance (CPA) (2) from the inflatable restraint IP module yellow 2-way connector (1) located above the sound insulator-RH.
11. Disconnect the inflatable restraint IP module yellow 2-way connector (3) located above the sound insulator-RH.