Station Preset Setting

The 5 preset buttons allow presetting 5 AM stations and 10 FM stations (using FM1 and FM2 bands) along with their respective ATC settings (if applicable). Setting station presets is accomplished by selecting a station with either manual TUNE, SEEK or SCAN then depressing the desired preset for at least 2 seconds. The audio will be muted and no channel number will be displayed during this time-out period, after which audio is returned and the channel number is displayed, signaling the new preset frequency has been stored. The button can then be released.

The display will show frequency and channel number for 5 seconds after the preset is set.