Preset Scan

When the SCAN push-button is pressed a minimum of 2 seconds, the Preset Scan mode will be activated. Pressing and holding the SCAN button will immediately mute the audio and after a 2 second delay, will cause the receiver to select the last preset selection initiated by either the radio preset buttons or the SWC program button (if applicable).

If the receiver is presently tuned to a preset that was selected with either one of these buttons, the receiver will increment to the next preset selection. The audio is then un-muted while the tuner pauses for 5 seconds before again muting and incrementing to the next preset. The associated ATC mode (if applicable) will also be selected along with the preset