EGR Valve Pipe

EGR Pipe Replacement:

REMOVE OR DISCONNECT
1. Bolt at water pump housing.
2. Raise vehicle.
3. Crossover exhaust pipe.
4. Nut at crossover exhaust pipe.
5. EGR valve pipe.

INSTALL OR CONNECT
1. EGR valve pipe.
2. Nut at crossover exhaust pipe.

Tighten
Nut to 60 Nm (44 lb. ft.).

3. Crossover exhaust pipe.
4. Lower vehicle.
5. Bolt at water pump housing.

Tighten
Bolt to 24 Nm (18 lb. ft.).