Without Memory Seats

Voltage is applied at all times through RH Rear Power Distribution Center Fuse Block #2 PWR ST Circuit Breaker 3 to the seat recliner switches.

With the switch in the RECLINE UP position, voltage is applied through the UP contact to the seat recliner motor. The motor is grounded through the DOWN contact to ground G202 (LH) or G201 (RH). The motor runs and the seat back reclines up.

With the switch in the RECLINE DOWN position, voltage is applied to the seat recliner motor through the DOWN contact, and grounded through the UP contact to ground G202 (LH) or G201 (RH). The motor runs in the opposite direction and the seat reclines down.