Only Rear Wiper Intermittent Does Not Operate

REAR WIPER AND WASHER SYSTEM

Only Rear Wiper Intermittent Does Not Operate


1. CHECK COMBINATION SWITCH (WIPER SWITCH) INPUT SIGNAL

Select "BCM" on CONSULT. With "WIPER" data monitor, make sure "RR WIPER INT" turns ON-OFF according to operation of combination switch (wiper switch).
When rear combination switch (wiper switch) is in INT position : RR WIPER INT ON

OK or NG
OK- Replace BCM. Service and Repair .
NG- Check the combination switch (wiper switch). System Description .