Front Wiper Does Not Stop

FRONT WIPER AND WASHER SYSTEM

Front Wiper Does Not Stop


1. CHECK CIRCUIT BETWEEN COMBINATION SWITCH (WIPER SWITCH) AND BCM

With CONSULT
1.Select "BCM" on CONSULT, and select "WIPER" on "SELECT TEST ITEM" screen.
2.Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "FR WIPER INT", "FR
WIPER LOW", "FR WIPER HI", and "FR WASHER SW" turn ON-OFF according to front combination switch (wiper switch) operation.
Without CONSULT
Combination Switch Inspection .
OK or NG
OK- Replace IPDM E/R. Component Tests and General Diagnostics .
NG- Check combination switch (wiper switch). Combination Switch Inspection .