Seals and Gaskets: Service and Repair

DIFFERENTIAL SIDE OIL SEAL

Removal and Installation


COMPONENTS












REMOVAL






1.Remove drive shaft assembly.
2.Remove differential side oil seal using a suitable tool.

CAUTION:
Do not scratch transaxle case or converter housing.

INSTALLATION






1.Drive the new differential side oil seal into the transaxle case side (B) and converter housing side (C) until it is flush using
Tool.

Tool number: - (J-47244)
: ST-33400001 (J-47005)






CAUTION:
- Do not reuse differential side oil seals.
- Apply specified NISSAN CVT fluid to side oil seals.
2.Install drive shaft assembly.
3.Check for CVT fluid leakage and check CVT fluid level. Checking CVT Fluid.