Seals and Gaskets: Service and Repair

ON-VEHICLE SERVICE

Differential Side Oil Seal


COMPONENTS












REMOVAL AND INSTALLATION

Removal
1.Remove front drive shaft.





2.Remove differential side oil seals using a suitable tool.

CAUTION:
Be careful not to scratch transaxle case and converter housing.
Installation
Installation is in the reverse order of removal.
NOTE:





- Drive each differential side oil seal evenly using Tools (Transaxle case side only) and suitable tool (Convertor housing side only) so that differential side oil seal protrudes by the dimension (C) or (D)
respectively.
(1): LH differential side oil seal (2): RH differential side oil seal (A): Transaxle case side (B): Converter housing side

Tool number: ST-35325000 (-)
: KV-31103000 (J-38982)

Unit: mm (in)





NOTE:
- Differential side oil seal removal direction is used as the reference.
- After installing differential side oil seal, check A/T fluid leakage and A/T fluid level. Checking.