Disassembly And Assembly

REAR DRUM BRAKE

Disassembly and Assembly of Wheel Cylinder


DISASSEMBLY






1.Remove boots at the right and left of the wheel cylinder, and pull the pistons and spring out of the cylinder.
2.Remove the piston cups from the pistons.

INSPECTION AFTER DISASSEMBLY

Check the pistons, spring and inner wall of the cylinder for wear, corrosion, and damage. Replace any parts as necessary.

ASSEMBLY


CAUTION:
When inserting the piston, be careful not to scratch the cylinder.
1.Apply brake fluid to the piston sliding surface on the wheel cylinder.





2.Apply rubber grease to the piston cups and boots and assemble the wheel cylinder as shown.