Inspection

BRAKE TUBE AND HOSE

Inspection After Installation


CAUTION:
- Always disassemble the parts and retighten their fittings, if a brake fluid leak is detected. Replace applicable part with a new one, if damaged part is detected.
- If leak is detected at the connections, retighten it or replace the damaged part.
1.Check brake hose, tube, and connections for fluid leaks, damage, twisting, deformation, contact with other parts, and loose connections.
2.While depressing pedal under a force of 785 N (80 kg-f, 177 lb-f) with the engine running for approximately 5 seconds, check for fluid leaks from each part of the brake hydraulic system.