"P-SHIFT" Warning Lamp (With CVT or A/T) Check

INTELLIGENT KEY SYSTEM

"P-SHIFT" Warning Lamp (With CVT or A/T) Check


1. CHECK WARNING LAMP OPERATION

With CONSULT
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT.
- Select "KNOB ON".
"P-SHIFT" warning lamp should illuminate.
Without CONSULT
1.Turn ignition switch OFF.
2.While monitoring the combination meter warning lamps, turn ignition switch ON. "P-SHIFT" warning lamp should illuminate for 1 second to perform a bulb check.





OK or NG
OK- Inspection End.
NG- Check combination meter. Refer to System Description.