Fluid Pump: Service and Repair

ON-VEHICLE SERVICE

Oil Pump Fitting Bolt


COMPONENTS











NOTE:
Replace the oil pump fitting bolt and the O-ring if oil leaks or exudes from the oil pump fitting bolt.

REMOVAL AND INSTALLATION

Removal
1.Remove the oil pump fitting bolt and O-ring.

CAUTION:
Do not reuse oil pump fitting bolt and O-ring.
Installation
Installation is in the reverse order of removal.

CAUTION:
- Do not reuse oil pump fitting bolt and O-ring.
- Apply CVT fluid to O-ring.
- After installation is complete, check for CVT fluid leakage and CVT fluid level. Procedures.