Front Steering Knuckle: Service and Repair

STEERING KNUCKLE

Removal and Installation












REMOVAL

1.Remove front wheel hub and bearing assembly. Front Wheel Hub.
2.Remove steering linkage from steering knuckle. Exploded View.
3.Remove steering knuckle lower pinch bolt.
4.Remove steering knuckle to strut bolts, then remove steering knuckle. Component.

INSPECTION AFTER REMOVAL

Check for deformity, cracks and damage on each part, replace if necessary.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Do not reuse non-reusable parts.