Removal And Installation For High-Pressure Flexible Hose

REFRIGERANT LINES

Removal and Installation for High-pressure Flexible Hose


REMOVAL

1.Discharge the refrigerant. HFC-134A (R-134A) Service Procedure.
2.Remove the high-pressure flexible hose. Locations.

CAUTION:
Cap or wrap the joint of the hose with a suitable material such as vinyl tape to avoid the entry of contaminants.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-rings.
- Apply A/C oil to the O-ring of the high-pressure flexible hose for installation.
- After charging the refrigerant, check for leaks. Checking Of Refrigerant Leaks.