Front Wiper Does Not Stop

FRONT WIPER AND WASHER SYSTEM

Front Wiper Does Not Stop


1. CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM

With CONSULT
1.Select "BCM" on CONSULT, and select "WIPER" on "SELECT TEST ITEM" screen.
2.Select "DATA MONITOR". Make sure that "FR WIPER INT", "FR WIPER LOW", "FR WIPER HI", and "FR
WASHER SW" turn ON-OFF according to front wiper switch operation.
Without CONSULT
Combination Switch Inspection.
OK or NG
OK- Replace IPDM E/R. Service and Repair.
NG- Check combination switch (wiper switch). Combination Switch Inspection.