Vehicle Does Not Creep Backward In "R" Position

TROUBLE DIAGNOSIS FOR SYMPTOMS

Vehicle Does Not Creep Backward in "R" Position


SYMPTOM:

Vehicle does not creep backward when selecting "R" position.

DIAGNOSTIC PROCEDURE


1. CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. CVT Trouble Diagnosis.
Is any malfunction detected by self-diagnosis
YES- Check the malfunctioning system. CVT Trouble Diagnosis.
NO- GO TO 2.

2. CHECK CVT POSITION

Check CVT position. Testing and Inspection.
OK or NG
OK- GO TO 3.
NG- Adjust CVT position. Shift Control System.

3. CHECK CVT FLUID LEVEL

Check CVT fluid level. Procedures.
OK or NG
OK- GO TO 4.
NG- Refill CVT fluid.

4. CHECK LINE PRESSURE

Check line pressure at idle. CVT Trouble Diagnosis.
OK or NG
OK- GO TO 5.
NG- Check the malfunctioning item. CVT Trouble Diagnosis.

5. CHECK STALL REVOLUTION

Check stall revolution. CVT Trouble Diagnosis.
OK or NG
OK- GO TO 6.
NG- Check the malfunctioning item. CVT Trouble Diagnosis.

6. CHECK SYMPTOM

Check again. CVT Trouble Diagnosis.
OK or NG
OK-INSPECTION END
NG- GO TO 7.

7. CHECK TCM

1.Check TCM input/output signals. CVT Trouble Diagnosis.
2.If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK - Replace the transaxle assembly. Removal And Installation
(MR-20DE), Removal And Installation (QR-25DE).
NG- Repair or replace damaged parts.