Power Distribution Module: Service and Repair

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation of IPDM E/R


REMOVAL






1.Disconnect negative battery cable.
2.Remove the air cleaner and air duct, Removal And Installation (QR-25DE only).
3.Lift up the IPDM E/R (1) while pushing and opening pawls (A) or (B), and remove the IPDM E/R while pushing and opening the other side pawls.
4.Disconnect harness connector.

INSTALLATION

Installation is the reverse order of removal.