Turn Signals Do Not Operate

TURN SIGNAL AND HAZARD WARNING LAMPS

Turn Signals Do Not Operate


1. CHECK COMBINATION SWITCH INPUT SIGNAL

With CONSULT
1.Select "BCM" on CONSULT. Select "FLASHER" on "SELECT TEST ITEM" screen.
2.Select "DATA MONITOR". Make sure that "TURN SIGNAL R" and "TURN SIGNAL L" turn ON-OFF linked with operation of combination switch (lighting and turn signal switch).
When combination switch : TURN SIGNAL R ON
(lighting and turn signal
switch) is right position
When combination switch : TURN SIGNAL L ON
(lighting and turn signal
switch) is left position
Without CONSULT
Combination Switch Inspection.
OK or NG
OK- Replace the BCM. Service and Repair .
NG- Check combination switch (lighting and turn signal switch). Combination Switch Inspection .