Diagnosis Procedure 3

NATS (Nissan Anti-Theft System)

Diagnosis Procedure 3

Self-diagnostic results:
"ID DISCORD, IMM-ECM" displayed on CONSULT screen

1. CONFIRM SELF-DIAGNOSTIC RESULTS

Confirm SELF-DIAGNOSTIC RESULTS "ID DISCORD, IMM-ECM" displayed on CONSULT screen.
NOTE:
"ID DISCORD IMM-ECM":
Registered ID of BCM is in discord with that of ECM.
Is CONSULT screen displayed as shown above [P1611]?
YES- GO TO 2.
NO- GO TO Trouble Diagnosis.

2. PERFORM INITIALIZATION WITH CONSULT

Perform initialization with CONSULT. Re-register all NATS ignition key IDs.
For initialization, refer to "CONSULT Operation Manual".
NOTE:
If the initialization is not completed or malfunctions, CONSULT shows message on the screen [INITIALIZATION FAIL].
Can the system be initialized?
YES- - Start engine. (END)
- (System initialization had not been completed.)
NO-ECM is malfunctioning.
- Replace ECM.
- Perform initialization with CONSULT
For initialization, refer to "CONSULT Operation Manual"