Front Seat Belt

FRONT SEAT BELT

SEAT BELT BUCKLE : Removal and Installation


REMOVAL


WARNING:
Before servicing, push power switch OFF, disconnect 12V battery negative terminal and wait 5 minutes or more. Refer to "Precaution for Removing 12V Battery" Precaution for Removing 12V Battery.
1.Remove front seat from the vehicle.
Refer to "Removal and Installation" Removal and Installation.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
2.Remove harness fixing clamps of seat belt buckle and connector fixing clip that are installed on seat.
3.Remove seat cushion inner finisher. Refer to "SEAT CUSHION : Disassembly and Assembly" Service and Repair.
4.Remove seatback trim and seatback pad. Refer to "SEATBACK : Disassembly and Assembly" Service and Repair.
5.Remove seat belt buckle mounting anchor bolt, and then remove seat belt buckle from seat.

INSTALLATION

Install in the reverse order of removal.