Rear Foot Duct 2

DUCT AND GRILLE

REAR FOOT DUCT 2 : Removal and Installation


REMOVAL

1.Remove passenger seat assembly. Refer to "Removal and Installation" Removal and Installation.
2.Remove front kicking plate inner RH and rear kicking plate inner RH. Refer to "KICKING PLATE INNER : Removal and Installation" Kicking Plate Inner.
3.Remove center pillar lower garnish RH. Refer to "CENTER PILLAR LOWER GARNISH : Removal and Installation" Center Pillar Lower Garnish.
4.Remove dash side finisher RH. Refer to "DASH SIDE FINISHER : Removal and Installation" Dash Side Finisher.





5.Peel off floor carpet (1).
6.Remove rear foot duct 2 (2) fixing clip (A), and then remove rear foot duct 2 from the vehicle.

INSTALLATION

Install in the reverse order of removal.