Overhaul

BRAKE PEDAL

Inspection and Adjustment


INSPECTION AFTER REMOVAL

- Check the brake pedal assembly for bend, damage, and cracks on the welded parts. If any is found, replace brake pedal assembly.
- Move it by 100 mm (3.94 in) to check that the hysteresis unit assembly moves in conjunction with brake pedal. If a malfunction exists, replace hysteresis unit assembly.

ADJUSTMENT AFTER INSTALLATION

- Adjust each item of brake pedal after installing the brake pedal assembly to the vehicle. Adjustments.
- Perform the release position learning of the accelerator pedal. Work Procedure.