Trunk / Liftgate Handle: Service and Repair

BACK DOOR LOCK

OUTSIDE HANDLE : Removal and Installation


REMOVAL

1.Remove the back door lower finisher. Refer to "BACK DOOR LOWER FINISHER : Removal and Installation" Back Door Lower Finisher.





2.Disconnect harness connector.
3.Remove back door handle mounting nuts.
4.Remove harness grommet from back door panel, and then Remove back door handle.

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
After installation, check back door open/close, and lock/unlock operation.