Power Window Switch: Service and Repair

POWER WINDOW MAIN SWITCH

Removal and Installation


REMOVAL

1.Remove power window main switch finisher. Removal And Installation.





2.Remove power window main switch (1) from power window main switch finisher (2) using flat-head screw driver (A).

Broken triangle indicates : Pawl


CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION

Install in the reverse order of removal.
NOTE:
If power window main switch is replaced or is removed, it is necessary to perform the initialization procedure.
Work Procedure.