AWD Warning Lamp

COMPONENT PARTS

AWD Warning Lamp

- After the AWD system is activated, the AWD warning lamp turns OFF during front and rear wheels driving torque distribution.
- After the AWD system is deactivated by fail-safe function and torque distribution of front and rear wheels is stopped, the AWD warning lamp turns ON to indicate that the state is in 2WD.
NOTE:
The AWD warning lamp does not turn ON when only torque distribution of both rear wheels is stopped by the fail-safe function.
- The AWD warning lamp blinks to indicate that the state is in 2WD when the AWD system is temporarily stopped by the protection function.
- Also turns ON when ignition switch is turned ON, for the purpose of lamp check. Turns OFF after the engine starts if system is normal.





*: The AWD warning lamp does not turn ON when only torque distribution of both rear wheels is stopped.
NOTE:
AWD warning lamp also turns ON due to data reception error, CAN communication error etc.