AWD Warning Lamp Blinks Slowly

AWD WARNING LAMP BLINKS SLOWLY

Description

AWD warning lamp blinks at approximately 2 seconds intervals while driving.


Diagnosis Procedure


1. CHECK VEHICLE SPEED SIGNAL

With CONSULT
1.Turn the ignition switch ON.
2.Check that each value of "WHEEL SPD SEN FR", "WHEEL SPD SEN FL", "WHEEL SPD SEN RR", and
"WHEEL SPD SEN RL" in "DATA MONITOR" for "ALL MODE AWD/4WD" is almost equal.
Is the inspection result normal?
YES- GO TO 2.
NO- Proceed to P1808.

2. CHECK TIRE

Check the following.
- Tire pressure
- Tire wear condition
- Front and rear tire size (There is no difference between front and rear tires.)
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace error-detected parts.

3. TERMINAL INSPECTION

Check AWD control module harness connector for disconnection.
Is the inspection result normal?
YES- Replace AWD control module. Removal And Installation.
NO- Repair or replace the error-detected parts.