Inspection

CONTROL LINKAGE

Inspection


INSPECTION AFTER INSTALLATION

Shifter Lever Knob
Check that the shifter lever knob is installed in the right position.
Shifter Cable and Selector Cable
- Pull each cable in the removal direction to check that it dose not disconnect from the cable mounting bracket.
- Pull each cable in the removal direction to check that it dose not disconnect from the M/T shift selector assembly.
- Pull grommet in the removal direction to check that it dose not disconnect from the vehicle.
M/T Shift Selector Assembly and Shifter Lever
- Check that there is no tangle, hook, abnormal sound, looseness, and interference when the shifter lever is moved to each position. If there is a malfunction, then repair or replace the malfunctioning part.
- Check that the shifter lever smoothly returns to the neutral position after moving the lever from 1st to 2nd gear and moving hands off the lever. If there is a malfunction, then repair or replace the malfunctioning part.
- Check that the shifter lever smoothly returns to the neutral position after moving the lever from 5th to 6th gear and moving hands off the lever. If there is a malfunction, then repair or replace the malfunctioning part.