Removal and Installation

CSC (CONCENTRIC SLAVE CYLINDER)

Removal and Installation


CAUTION:
- Never reuse CSC (Concentric Slave Cylinder). Because CSC slides back to the original position every time when removing transaxle assembly. At this timing, dust on the sliding parts may damage a seal of CSC and may cause clutch fluid leakage.
- Never disassemble CSC.
- Keep painted surface on the body or other parts free of clutch fluid. If it spills, wipe up immediately and wash the affected area with water.

REMOVAL

1.Remove transaxle assembly. Removal And Installation.
2.Remove CSC from clutch housing.

INSTALLATION

1.Install CSC to clutch housing, and then tighten CSC mounting bolts to the specified torque.

CAUTION:
- Never reuse CSC.
- Never insert and operate CSC because piston and stopper of CSC components may fall off.
2.For the next step and after, install in the reverse order of removal.