EPS Warning Lamp Does Not Turn Off

EPS WARNING LAMP DOES NOT TURN OFF

Description

EPS warning lamp does not turn OFF several seconds after engine started.


Diagnosis Procedure


1. PERFORM SELF-DIAGNOSIS

With CONSULT
1.Turn the ignition switch OFF to ON.
2.Perform "EPS" self-diagnosis.
Is any DTC detected?
YES- Check the DTC. Testing and Inspection.
NO- GO TO 2.

2. CHECK EPS WARNING LAMP

Perform the trouble diagnosis of EPS warning lamp. EPS Warning Lamp.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the specific malfunctioning part.

3. CHECK EPS CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT

Perform the trouble diagnosis of EPS control unit power supply and ground. C1601.
Is the inspection result normal?
YES- Check that there is no malfunction in each harness connector pin terminal or disconnection.
NO- Repair or replace the specific malfunctioning part.