IPDM E/R (Without I-Key)

IPDM E/R

Removal and Installation


CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL

1.Remove battery.
2.Press and expand pawls (A) on lateral side of IPDM E/R cover and remove IPDM E/R (1) from IPDM E/R
cover B (2).





3.Disconnect the harness connector and then remove the IPDM
E/R.





4.Remove IPDM E/R cover B mounting nuts (A).





5.Insert a flat-bladed screwdriver between IPDM E/R cover A (1)
and IPDM E/R cover B (2), disengage pawls, and remove IPDM
E/R cover A.
6.Remove IPDM E/R cover B.

INSTALLATION

Install in the reverse order of removal.