Check Before Engine Is Started

ROAD TEST

Check before Engine Is Started


1. CHECK CVT INDICATOR LAMP

1.Park vehicle on flat surface.
2.Move selector lever to "P" position.
3.Turn ignition switch OFF. Wait at least 5 seconds.
4.Turn ignition switch ON. (Do not start engine.)
Is shift position indicator activated for about 2 seconds?
YES- 1.Turn ignition switch OFF.
2.Perform self-diagnosis and note NG items.
CONSULT Function.
3.Go to Check At Idle.
NO- Stop "Road Test". Symptom Related Diagnostic Procedures.