Removal And Installation

TURBOCHARGER

Removal and Installation


REMOVAL

1.Drain engine coolant. Draining Engine Coolant.
2.Remove engine cover. Exploded View.
3.Remove air cleaner cover assembly and air cleaner body assembly. Exploded View.
4.Remove air inlet tube 3. Exploded View.
5.Remove cowl top extension. Exploded View.
6.Disconnect heated oxygen sensor 2 harness connector.
7.Remove front tube. Exploded View.
8.Remove catalyst converter. Exploded View (2WD models) or "AWD :
Exploded View" (AWD models).
9.Remove turbocharger assembly as follows:
a.Remove heat insulator.
b.Disconnect water hose from turbocharger. Exploded View.
c.Remove oil supply tube.
d.Remove mounting nuts of turbocharger.

CAUTION:
Never deform each turbocharger piping when pulling out the assembly.

INSTALLATION


CAUTION:
Do not reuse O-rings.
Install in the reverse order of removal.