Without Intelligent Key System

BCM (BODY CONTROL MODULE)

Removal and Installation

NOTE:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Without Intelligent Key System.

REMOVAL

1.Remove instrument lower panel. Removal And Installation.
2.Remove harness clip.
3.Remove BCM mounting screws.
4.Remove BCM and disconnect the connectors.
5.Remove relays and relay mounting bracket from BCM.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to perform "WRITE CONFIGURATION" when replacing BCM. Or not doing so, BCM control function does not operate normally.
NOTE:
Be sure to perform the system initialization (NATS) when replacing BCM. Without Intelligent Key System.