Map Light Bulb: Service and Repair

MAP LAMP

Replacement


CAUTION:
- Disconnect battery negative terminal or the fuse.
- Never touch glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

MAP LAMP BULB

1.Remove the lens (1).





- Insert a remover tool (A) into the gap between the lens.
- Disengage the lens fixing pawls, and then remove the lens.

Broken triangle indicates : Pawl

CAUTION:
Use a remover tool wrapped in tape.
2.Remove the bulb.