Component Inspection

HEADLAMP (LO) CIRCUIT

WITH DAYTIME RUNNING LIGHT SYSTEM : Component Inspection


1. CHECK DAYTIME RUNNING LIGHT RELAY 1

1.Turn the ignition switch OFF.
2.Remove daytime running light relay 1.
3.Check continuity between daytime running light relay 1 terminals.





4.Apply battery voltage to daytime running light relay 1 between terminals 1 and 2.
5.Check continuity between daytime running light relay 1 terminals.





Is the inspection result normal?
YES- Daytime running light relay 1 is normal.
NO- Replace Daytime running light relay- 1.