Removal And Installation

FRONT COMBINATION LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.Remove front bumper fascia. Removal And Installation.
2.Remove front combination lamp mounting bolts and nut.
3.Pull out front combination lamp assembly forward the vehicle, and then disconnect the connector before removing the headlamp assembly.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
Interference of front combination lamp lens with front fender may cause intrusion of water into front combination lamp or rusting of fender due to damage of painted surface. Be careful to operate without allowing parts to interfere with each other.