Front Combination Lamp

FRONT COMBINATION LAMP

Replacement


CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

PARKING LAMP BULB

1.Rotate the parking lamp bulb socket counterclockwise and unlock it.
2.Remove parking lamp bulb from the bulb socket.

FRONT MARKER LAMP BULB

1.Rotate the front marker lamp bulb socket counterclockwise and unlock it.
2.Remove the front marker lamp bulb from the bulb socket.

FRONT TURN SIGNAL LAMP BULB

1.Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
2.Remove front turn signal lamp bulb from the front turn signal lamp bulb socket.