Service Notice And Precautions For TPMS

PRECAUTIONS

Service Notice and Precautions for TPMS

- Low tire pressure warning lamp blinks for 1min, then turns ON when occurring any malfunction except low tire pressure. Erase the self-diagnosis memories for Tire Pressure Monitoring System (TPMS), or register the ID to turn low tire pressure warning lamp OFF. For ID registration, Work Procedure.
- ID registration is required when replacing or rotating wheels, replacing tire pressure sensor or BCM. Refer to
Work Procedure.
- Replace grommet seal, valve core and valve cap of tire pressure sensor in TPMS, when replacing each tire by reaching the wear limit. With Intelligent Key (With intelligent key system), Without Intelligent Key (Without intelligent key system).
- Because the tire pressure sensor conforms to North America radio law, the following items must be observed.
- The sensor may be used only in North America.
- It may not be used in any method other than the specified method.
- It must not be disassembled or modified.