Ignition Position Warning Function Does Not Operate

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?
YES- GO TO 2.
NO- Testing and Inspection.

2. CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with driver side door lock knob and door key cylinder?
YES- GO TO 3.
NO- System Description.

3. CHECK DOOR SWITCH

Check door switch.
With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. REPLACE BCM

1.Replace BCM. With Intelligent Key System.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.