Insufficient Heating

INSUFFICIENT HEATING

Description

- Insufficient heating
- No warm air comes out. (Air flow volume is normal.)


Diagnosis Procedure

NOTE:
Perform self-diagnoses with CONSULT before performing symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis.

1. CHECK COOLING SYSTEM

1.Check engine coolant level and check for leakage. Inspection.
2.Check radiator cap. Service and Repair.
3.Check water flow sounds of the engine coolant. Refilling Engine Coolant.
Is the inspection result normal?
YES- GO TO 2.
NO- Refill engine coolant and repair or replace the parts depending on the inspection results.

2. CHECK HEATER HOSE

Check installation of heater hose by visually or touching.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace parts depending on the inspection results.

3. CHECK HEATER CORE

1.Check temperature of inlet hose and outlet hose of heater core.
2.Check that inlet side of heater core is hot and the outlet side is slightly lower than/almost equal to the inlet side.

CAUTION:
Always perform the temperature inspection in a short period of time because the engine coolant temperature is very hot.
Is the inspection result normal?
YES- GO TO 4.
NO- Replace heater core. Service and Repair.

4. CHECK AIR LEAKAGE FROM EACH DUCT

Check duct and nozzle, etc. of the air conditioning system for air leakage.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace parts depending on the inspection results.

5. CHECK SETTING OF TEMPERATURE SETTING TRIMMER

1.Check setting value of temperature setting trimmer. Temperature Setting Trimmer.
2.Check that temperature setting trimmer is set to " direction".
NOTE:
The control temperature can be set by the temperature setting trimmer.
3.Set difference between the set temperature and control temperature to "0".
Are the symptoms solved?
YES- INSPECTION END
NO- Replace A/C auto amp. Removal And Installation.