Perform Lubricant Return Operation

LUBRICANT

Perform Lubricant Return Operation


CAUTION:
If a large amount of refrigerant or lubricant leakage is detected, never perform lubricant return operation.
1.Start the engine and set to the following conditions.
- Engine speed: Idling to 1,200 rpm
- A/C switch: ON
- Fan (blower) speed: Maximum speed set
- Intake door position: Recirculation
- Temperature setting: Full cold
2.Perform lubricant return operation for approximately 10 minutes.
3.Stop the engine.
4.Lubricant return operation is complete.