When SRS Is Not Activated In A Collision

COLLISION DIAGNOSIS

FOR FRONTAL COLLISION : When SRS is not activated in a collision


CAUTION:
Due to varying models and option levels, not all parts listed in the chart below apply to all vehicles.

WORK PROCEDURE

1.Before performing any of the following steps, ensure that all vehicle body and structural repairs have been completed.
2.Check the SRS components using the table below:
Replace any SRS components showing visible signs of damage. (dents, cracks and deformation, etc.)
3.Perform self-diagnosis using CONSULT or air bag warning lamp. Supplemental Restraints
or On Board Diagnosis Function for details. Ensure entire SRS operates properly.
4.After the work is completed, perform self-diagnosis to check that no malfunction is detected. Refer to
Description.

SRS INSPECTION (FOR FRONTAL COLLISION)