Without Intelligent Key System

VEHICLE SPEED SENSING AUTO LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC LOCK/UNLOCK SELECT" setting in "WORK SUPPORT".
Without Intelligent Key System.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "Lock Only" or "Lock/Unlock" in "WORK SUPPORT".

2. CHECK "AUTOMATIC DOOR LOCK SELECT" SETTING IN "WORK SUPPORT"

1.Select "DOOR LOCK" of "BCM" using CONSULT.
2.Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3.Check "AUTOMATIC DOOR LOCK SELECT" setting in "WORK SUPPORT".
Without Intelligent Key System.
Is the inspection result normal?
YES- GO TO 3.
NO- Set "VH SPD" in "AUTOMATIC DOOR LOCK SELECT".

3. REPLACE BCM

- Replace BCM. Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.